If your design challenges require high temperature stability, broad chemical resistance, stiffness, strength and creep resistance at elevated temperature, consider Fortron® Polyphenylene Sulfide (PPS).

Fortron PPS is a high-temperature linear PPS that offers excellent dimensional stability, inherent flame resistance, and excellent chemical and solvent resistance. PPS is insoluble in all known solvents below 200°C (392° F). It also shows tremendous stability in both typical and alternative automotive fuels. Standard injection moldable grades with glass fibers and/or mineral reinforcements are available, but many specialty grades are available for improved lubricity, low warpage, faster cycling and other areas of enhanced performance. Certain grades of Fortron PPS comply with ISO 10993 and USP Class VI, and Drug (DMF 14844) and Device (MAF-1097) Master Files have been created for them. These grades also meet European Directive 2002/72/EC for food contact applications and BfR (German Federal Institute for Risk Assessment , formerly BgVV, the German Federal Institute for Consumer Health Protection and Veterinary Medicine) standards.

Fortron products have been specified in a wide range of injection molded applications such as automotive under-the-hood parts, power train components, pumps, fuel system components, surface mount electrical/electronics components, blower and pump parts, protective and non-stick coatings, surgical devices and power tools. Fortron PPS can be extruded or blow molded, may be used to produce films and composites, and is an excellent candidate for fuel cells and diesel fuel cars.

Fortron linear PPS may be used with meltblown and spunbond technologies for melt spun nonwovens. Fiber and monofilament made from Fortron PPS can be found in woven or mesh conveyor belts, flame resistant clothing and filtration media. Ticona also offers unfilled, high viscosity Fortron PPS suitable for extrusion and compression molding to produce slabs, rods and other stock shapes commonly used for prototyping. 

如果您所面臨的設計挑戰是高溫穩定性、廣泛的耐化學性、高剛度、高強度，和高溫下的抗蠕變性，請您考慮選用Fortron PPS(聚苯硫醚)。

Fortron PPS是一種耐高溫線性PPS，它具有優異的尺寸穩定性、自阻燃和優異的耐化學溶劑性。PPS在200℃以下不溶于任何已知溶劑。，它也在傳統和另類汽車燃油中表現出了極優秀的穩定性。Fortron PPS有玻纖和礦物增強或者玻纖/礦物混合增強的標準注塑成型級，同時也有許多特殊品級，如潤滑改性級、低翹曲級、快速成型級及其它特殊性能改良品級。有些Fortron PPS品級符合ISO10993和美國藥典（USP）VI，同時它們已在美國藥物主文件檔案中（DMF 14844）和在美國醫療器械主文件檔案中（MAF 1097）列檔。這些品級也滿足歐洲有關對食品接觸的2002/72/EC指令和BfR（聯邦德國風險評估學院，以前的BgVV，聯邦德國消費者健康保護和獸醫學院）標準。

Fortron產品已經被指定應用于廣泛的注塑成型件中，比如汽車發動機蓋板下的部件、傳動系組件、泵、燃油系統組件、表面安裝型電子電氣元件、吹風機和泵元件、保護性非粘涂料、醫療設備和電動工具。Fortron PPS也是燃料電池和柴油車的優選材料，因?yàn)樗梢酝ㄟ^擠出和吹塑工藝來生產用于這些應用的膜和復合材料。

線性Fortron PPS可以用熔融吹塑和紡絲粘合技術生產熔融無紡布。由Fortron PPS生產的纖維和纖維單絲已經用于織造或編織傳輸帶、阻燃布料和過濾載體。泰科納也提供用于擠出和壓塑成型工藝的非填充、高粘度Fortron PPS產品，用于生產厚板、圓棒狀和其它坯料。這些坯料通常用來加工樣件。

為什么你需要Ticona工程塑料Fortron PPS,請看?泰科納工程塑料Fortron PPS的應用